• Hot Rolled Coils & Sheet

    A finished steel product such as sheet or strip which has been wound or coiled after rolling. A flat rolled product over 12 inches in width and of less thickness than plate.

  • MS Plates

    A flat rolled product from slabs or ingots of greater thickness than sheet or strip. Hot Rolled Steel Plate are mainly used in Construction of Bridges, Highway Construction and Other Engineering construction


  • Chequered Plates

    Chequer plate is a plate with a regular pattern of projections on one side, showing diamond or other shapes, with the reverse side being smooth. It can be in the form of tear drop (more…)

  • Boiler Plates

    Boiler quality steel is a group of steels is that is used in a variety of industries for the fabrication of boilers and pressure vessels. When steel  (more…)

  • Cold Rolled Coils & Sheets

    A finished steel product such as sheet or strip which has been wound or coiled after rolling. Flat steel coil products, with widths of less than 600mm for hot rolled products and less than 500mm for cold rolled (more…)

  • Galvanized Products

    Produced when hot or cold rolled sheet or strip is coated with zinc, either by the hot-dipping or electrolytic deposition processes. Zinc coating applied by the hot dip method is normally heavy enough to resist corrosion without additional protective coating. (more…)

  • Galvanized & PPGI Corrugated Sheet

    Corrugated galvanised iron or steel (colloquially corrugated iron or pailing (in Caribbean English), corrugated sheet metal (more…)

  • Color Coils & Sheets

    Galvanized sheet or coil is defined as a carbon steel sheet coated with zinc on both sides. Continuous hot dipping, or electro-galvanizing are the two processes used to produce galvanized


  • Tin Plate Coils & Sheet

    Tin mill products include electrolytic tinplate, electrolytic chromium coated steel (also referred to as tin free steel or TFS), and black plate, the uncoated steel. About 90% of tin mill products (more…)

  • MS Angle

    MS Angles are L-shaped structural steel represented by dimension of sides & thickness. There are various sizes of angles. MS Angels are used for manufacturing of truck-trailers, EOT cranes


  • MS Channel

    Mild Steel MS Channel basically “C” channel. MS Channel are used in many industries for fulfilling various purposes, and are renowned throughout the industry for their

  • H Beam, I Beam

    beam is a structural element that is capable of withstanding load primarily by resisting against bending. The bending force induced into the material of the beam as a result of the external loads, own weight, span and external reactions to these loads


  • MS Flat

    Flat bars are a flat, rectangular section with square edges varying in sizes. This cost-effective steel product is suitable for a wide variety of applications and is distributed into the (more…)

  • Z Section

    The roll formed Z Section is often used as a wall girt or roof purlin in a structural system. Using material thickness between 16 ga (0.060in) and 10 ga (0.135in), standard  (more…)

  • MS Round Bars

    Mild steel bars (as per IS: 432, part-I -1982)

    Mild steel bars are used for tensile stress of RCC (Reinforced cement concrete) slab beams etc. in reinforced  (more…)

  • MS Deformed Bar

    deformed bars are rods of steels provided with lugs, ribs or deformation on the surface of bar, these bars minimize slippage in concrete and increases the bond between the two  (more…)

  • MS Rail

    The track on a railway or railroad, also known as the permanent way, is the structure consisting of the rails, fasteners, railroad ties (sleepers, British English) and ballast (or slab track), plus the underlying subgrade. It enables trains to move by providing a dependable surface for their wheels (more…)

  • MS Pipes

    Mild steel is the least expensive of all steel and the most common steel used. Used in nearly every type of product created from steel, it is weldable, very hard and, although it easily rusts, 


  • G I Pipe

    Galvanized piping

    In the early 20th century, galvanized piping replaced cast iron and lead in cold-water plumbing. Typically, galvanized piping rusts (more…)